×

Estimated Delivery Dates ×

Las Vegas, NV
Est. Arrival Service Level
Loading... U.S. Postal Service (UPS Surepost)
Loading... UPS Ground
Loading... UPS 3 Day Select
Loading... UPS 2nd Day Air
Loading... UPS Next Day Air Saver
Loading... UPS Next Day Air

*Estimated delivery dates are shown for this product only. Delivery date may change with additions to cart. Final delivery date can be seen in your cart. For more information on processing and transit times see our shipping page.

Revo 1/8" Cable Rail Swage Stud Tension Fitting Assembly (SSA-1)
Revo 3/16" Cable Rail Swage Stud Tension Fitting Assembly (SSA-2)
HAAS three sixteenths swage stud assembly exploded
haas three sixteenths inch cable railing stud assembly
3 16 swage stud assembly 3d
1 8 swage stud assembly 3d section
1 8 swage stud assembly drawing
1 8 swage stud assembly drawing section
3 16 swage stud assembly 3d section
3 16 swage stud assembly drawing
3 16 swage stud assembly drawing section
Revo 1/8" Cable Rail Swage Stud Tension Fitting Assembly (SSA-1)
Revo 3/16" Cable Rail Swage Stud Tension Fitting Assembly (SSA-2)
HAAS three sixteenths swage stud assembly exploded
haas three sixteenths inch cable railing stud assembly
3 16 swage stud assembly 3d
1 8 swage stud assembly 3d section
1 8 swage stud assembly drawing
1 8 swage stud assembly drawing section
3 16 swage stud assembly 3d section
3 16 swage stud assembly drawing
3 16 swage stud assembly drawing section

HAAS Revo Cable Rail Swage Stud Tension Fitting Assembly

SKU: HSA12402-001
Size: 3/16"
Price:
$4.94
Stock:
1855 In Stock

Expected Next Available Date:

In Stock Orders Ships Same Day!!!

You can add more than the in-stock qty to your cart, and we will ship your complete order once all the stock arrives. In Stock Orders the ship same day if placed before 2PM CT. All items in your cart must be listed as In Stock. Place separate orders on in-stock and back ordered items if you want items to ship the same day. Applies to UPS shipping methods only, LTL Freight may go out the same day if carrier pick-up schedule permits.

HAAS Revo Cable Rail Swage Stud Tension Fitting Assembly

Register to receive a notification when this item comes back in stock.

Notify me when available

Quick Specs (Click to see full Specs)

Ordering Tip: Please consider ordering a few more than what you need to prevent delays in your project from dropped products or installation mistakes.
Material: Type 316 Stainless Steel

Ultimate Tensile Strength (UTS):

Working Load Limit (WLL):

Minimum Breaking Load (MBL):

Size:

Length:

Weight:

Standard Reel Size (Flange Diameter x Height):

Shipping Note:

Made in USA Manufactured in NOLA Type 316 Stainless Steel Machining E Design XQ Certified

Return Policy: We only accept full assemblies as returns, see our return policy for more info.

Instructional Videos

View More Blogs

Description

HAAS Revo Cable Rail Swage Stud Tension Fitting Assembly

Product Resources

HAAS Revo Cable Railing Guide
HAAS Stainless Cable Rail Basics
Stainless Steel Guide
Galling in Stainless Steel Guide
RoHS Statement
REVO or AXIS?

Reviews

Trustpilot Reviews Logo

Customer Questions & Answers

Ask a Question

  • In the description for this tensioner, it mentions it could handle up to 100 feet of cable run (3/16 size). In my plans for my DIY cable railing system, I was under the impression that I would need to split several of my straight long runs (40 ft) into shorter runs (2 @ 20ft). It sounds like the use of this tensioner it would allow me to keep that as one run and avoid splitting into 2 runs. Would this tensioner be strong enough? Many thanks for any advice. P.S. I will have 2x2 metal corner posts, 1/4 inch thick.

    It really depends on the spacing between the posts holding up the cable.  If you are supporting the cable every 4-6 feet you can run with 1 tensioner upwards of 100 feet.  It is recommended to use 2 tensioners (1 on each side) for cable that is not supported every 8-10 feet or more, and even then, you may still see some sag in the line.

  • Can the 1/8" Hydraulic Cable Railing Swager be used with the REVO family tension fittings? Your listing for the REVO tension fitting says that the Crenshaw swager must be used, but the hydraulic swager listing says that it can be used for REVO and AXIS fittings. Please clarify.

    Yes the hydraulic is our temporary solution to the swaging process while we put the Crenshaw tool through some tests.