In the description for this tensioner, it mentions it could handle up to 100 feet of cable run (3/16 size). In my plans for my DIY cable railing system, I was under the impression that I would need to split several of my straight long runs (40 ft) into shorter runs (2 @ 20ft). It sounds like the use of this tensioner it would allow me to keep that as one run and avoid splitting into 2 runs. Would this tensioner be strong enough? Many thanks for any advice. P.S. I will have 2x2 metal corner posts, 1/4 inch thick.

It really depends on the spacing between the posts holding up the cable. If you are supporting the cable every 4-6 feet you can run with 1 tensioner upwards of 100 feet. It is recommended to use 2 tensioners (1 on each side) for cable that is not supported every 8-10 feet or more, and even then, you may still see some sag in the line.

Can the 1/8" Hydraulic Cable Railing Swager be used with the REVO family tension fittings? Your listing for the REVO tension fitting says that the Crenshaw swager must be used, but the hydraulic swager listing says that it can be used for REVO and AXIS fittings. Please clarify.

Yes the hydraulic is our temporary solution to the swaging process while we put the Crenshaw tool through some tests.

Revo 1/8" Cable Rail Swage Stud Tension Fitting Assembly (SSA-1)

Revo 3/16" Cable Rail Swage Stud Tension Fitting Assembly (SSA-2)

HAAS three sixteenths swage stud assembly exploded

haas three sixteenths inch cable railing stud assembly

3 16 swage stud assembly drawing section

HAAS Revo Cable Rail Swage Stud Tension Fitting Assembly

Name: Revo 1/8" Thru Post Tensioner (SSA-1)
Brand: HAAS Stainless Revo
SKU: HSA12401-001
Price: 4.83 USD
Availability: InStock

SKU: HSA12401-001

Size: 1/8"

Variant

Price:

$4.83

Stock:

2901 In Stock

Expected Next Available Date:

Quantity:

Notify me when available

Quick Specs (Click to see full Specs)

Ordering Tip: Please consider ordering a few more than what you need to prevent delays in your project from dropped products or installation mistakes.

Material: Type 316 Stainless Steel

Ultimate Tensile Strength (UTS):

Working Load Limit (WLL):

Minimum Breaking Load (MBL):

Size:

Length:

Weight:

Standard Reel Size (Flange Diameter x Height):

Shipping Note:

Return Policy: We only accept full assemblies as returns, see our return policy for more info.

Instructional Videos

View More Blogs

HAAS Revo Cable Rail Swage Stud Tension Fitting Assembly

HAAS Revo Cable Railing Guide
HAAS Stainless Cable Rail Basics
Stainless Steel Guide
Galling in Stainless Steel Guide
RoHS Statement
REVO or AXIS?

Ask a Question

In the description for this tensioner, it mentions it could handle up to 100 feet of cable run (3/16 size). In my plans for my DIY cable railing system, I was under the impression that I would need to split several of my straight long runs (40 ft) into shorter runs (2 @ 20ft). It sounds like the use of this tensioner it would allow me to keep that as one run and avoid splitting into 2 runs. Would this tensioner be strong enough? Many thanks for any advice. P.S. I will have 2x2 metal corner posts, 1/4 inch thick.

It really depends on the spacing between the posts holding up the cable. If you are supporting the cable every 4-6 feet you can run with 1 tensioner upwards of 100 feet. It is recommended to use 2 tensioners (1 on each side) for cable that is not supported every 8-10 feet or more, and even then, you may still see some sag in the line.
Can the 1/8" Hydraulic Cable Railing Swager be used with the REVO family tension fittings? Your listing for the REVO tension fitting says that the Crenshaw swager must be used, but the hydraulic swager listing says that it can be used for REVO and AXIS fittings. Please clarify.

Yes the hydraulic is our temporary solution to the swaging process while we put the Crenshaw tool through some tests.

Recover password

HAAS Revo Cable Rail Swage Stud Tension Fitting Assembly

Instructional Videos

Description

Product Resources

Reviews

Customer Questions & Answers

Estimated Delivery Dates ×

HAAS Revo Cable Rail Swage Stud Tension Fitting Assembly