Tire Chains

Yes, some tire chains are rated for limited use on paved surfaces. pewag Tire Chains come in the following surface conduction ratings:

• Off Road Only
  Chains designated “Off Road Only” should not be used on paved surfaces. These tire chains have chain profiles that are very aggressive to deliver maximum traction and will damage paved road surfaces and prematurely wear the tire chains.
• Highway
  Chains designated for highway use are designed to deliver additional traction and a long service life while not damaging snowy or icy paved surfaces. As with all tire chains, extended use on clear paved surfaces will cause excessive chain wear.
• Highway & Off Road
  Chains rated for paved road usage can also be used Off Road but will have less traction Off Road than Off Road dedicated chains.

• Cam Assisted
  
  These traction chains are supplied with built-in Cam tensioners and a Cam tensioning tool for easy, quick, and secure tensioning of the tire chain to the tire.

---

• Manual without Cams
  
  These traction chains are supplied with a manual lever tensioner to provide adequate tension when installed properly.

• Ladder Style
  
  Ladder Pros:
  • Effective in Deep Snow and Mud: Ladder chains excel in deep snow by providing good grip as they dig into the surface like a paddle tire.
  • Easier Installation: Their straightforward design makes them easier and quicker to install, which is helpful in challenging conditions.
  • Cost-Effective: Generally, ladder chains are less expensive than zig-zag chains.
  Ladder Cons:
  • Bumpier Ride: The design can cause a bumpier ride due to the gaps between the cross chains, leading to a less smooth driving experience.
  • Less Continuous Traction: The gaps between cross chains can result in less consistent traction, particularly on ice and packed snow.
  • Limited Lateral Stability: Ladder chains offer less side-to-side stability, which can increase the risk of sliding sideways on slick surfaces.

---

• Zig Zag
  
  Zig Zag Pros:
  • Continuous Traction: The zig-zag pattern offers more consistent contact with the road, providing excellent traction, especially on ice and packed snow.
  • Smoother Ride: The evenly distributed chain pattern generally results in a smoother ride with less bumpiness compared to ladder chains.
  • Good Lateral Stability: The pattern helps with side-to-side stability, reducing the risk of sliding on slick surfaces.
  Zig Zag Cons:
  • Higher Cost: Zig-zag chains are often more expensive due to their complex design.
  • Less Effective in Deep Snow: They may not dig into deep, loose snow as effectively as ladder or H-pattern chains.

---

• H-Pattern
  
  H-Pattern chain is often used in tire applications with deep treads and is designed to keep the cross-chain riding above the treads rather than falling into the valleys of the tire tread. Due to the longitudinal and latitudinal pattern of the cross chains, this chain is extremely effective on rough and uneven terrain.

• Starwave Square Link
  
  Starwave Chain features a unique wave-shaped link pattern which increases the surface area in contact with the ground enhancing grip. Made from nickel manganese alloy steel, which is heat-treated for increased hardness and durability. The square-shaped links, provide more surface area for better traction compared to traditional round links. Square links also tend to wear more evenly, are self-cleaning, and reversible, extending the life of the chain.

---

• Star Stud
  
  pewag’s Star Stud revolutionary 8-sided design is proven to outlast and outperform the competition. Breaking the mold of conventional round studs; pewag’s 8-sided stud allows for a deeper hardening on each individual piece for longer service life. This chain is engineered for the most aggressive off-road applications. Built to last and Made in USA!

---

• Square Link
  
  The chains are made with nickel manganese alloy square link wear up to 8 times longer than conventional twist link tire chains while giving you up to 32% more traction. These chains are also reversible to extend the service life of the tire chain

• Dual Triples
  
  Dual Triple refers to a specific configuration of tire chains that are designed to cover a set of dual tires (two tires mounted side by side on the same axle). In a "dual triple" configuration, there are three sets of cross-chains that run across each tire in the dual set, which helps to ensure a more even distribution of traction and better grip. This configuration is particularly useful in severe conditions where maximum traction is needed.

---

• Single
  
  Tire chain designed to cover a single tire.

pewag tire chains come in a variety of diameter sizes that are aimed to provide the best mix of durability, traction, and ride comfort for your application. Typically, larger chains are suited for heavier more abusive equipment and environments, and smaller chains are suited for lighter equipment and better ride comfort. The recommended sizes are designed to prove adequate traction and durability for your vehicle size.

• Larger Chains:
  • Suited for heavier equipment
  • Handles rougher environments and forces exerted on the chains
  • Rougher ride
  • More costly
• Smaller Chains:
  • Suited for lighter equipment
  • Better ride comfort
  • Adequate durability and traction for properly sized equipment
  • Less costly

Cross chain spacing is an import consideration for your application, and there are a few terms that can describe the spacing configuration:

• Single Spacing / 4-Link Spacing
  • Fewer cross chains per tire
  • Typically spaced every 4 side chain links apart
  • Moderate traction in light to medium snow & ice conditions
  • Easier to install
  • Less costly
• Double Spacing / 2-Link Spacing
  • More cross chains per tire
  • Typically spaced every 2 side chain links apart
  • Superior traction in deeper snow & ice conditions
  • More difficult to install
  • More costly

Pre-cut replacement cross chains are set to a certain number of links and come equipped with end hooks to replace OEM cross chains that have become damaged or excessively worn.

Bulk cross chain comes in 50 and 100 ft lengths and are especially cost effective for fleets or other situations where a user replaces lots of cross chain due to heavy usage. Side Chain hooks must be purchased separately.

pewag rubber Glacier tensioners are designed to reduce noise and vibration and provide a tighter fit for any tire chain.