In today's blog we are gonna teach you how you can use the Tyler Tool Hand Swager to properly swage your HAAS
Stainless cable railing fittings.
If you've never heard the term swage before or that you need to make a swage on a component you'll be happy to
know that you're not alone. Making a swage or swaging a component is exactly the same thing as making a crimp or
crimping a component and if you've never heard of either of the two terms they're basically the process of using
a hand tool to permanently connect your cable railing component onto the end of your cable.
Swaging Made Easy
At HAAS Stainless the swaging process for all of our cable railing components is going to be the exact same
regardless of whichever component you have. To get started the first thing that you want to do is insert the end
of your cable into the swage cavity of your cable railing component and then locate an area on the component
that's called the swage area. The swage area is basically going to be a designated spot on your component where
the jaws of your Tyler Tool Hands Swager need to be situated before making your swage. The swage area is going
to start at the opening of the swage cavity and it's going to stop at the first indentation line that you see
directly above it.
Now go ahead and open the jaws of your Tyler Tool Hands Swager and then place your cable railing fitting
into the jaws of the swager which correspond with the size of the fitting that you're using. Then double
check that the swager jaws are correctly seated at the swage area on the fitting. Now completely close the
handles of your Tyler Tool Hands Swager and make your first swage. Then slightly open the jaws of your
swager and rotate the cable and fitting approximately 90 degrees and then make your second and final swage
on the fitting.
For a full video with more information on the HAAS Cable Rail System, please visit our HAAS REVO page.
View our YouTube Channel for
instructional and informational videos about our products.
If you have any questions or concerns, contact us.