News
Chauvin Bros: Tractor Pros
We would like to give a special thanks to Chauvin Brothers Tractor for allowing us to film our binder videos at their facility. Watch our...
REVO or AXIS? Which Cable Railing System Should I Install?
You’ve decided that cable railing is going to be the best option for your project, but you're not sure which system to choose. At HAAS Stainless, we manufacture two different cable railing systems. The HAAS REVO system and the HAAS AXIS system. So, we're going to compare the two on versatility, look and esthetics, and ease of use.
2nd Annual The CAUSE Event at WWII
The second annual event of The C4USE was held at The National WWII Museum in the US Freedom Pavilion on March 25th, 2023 with Master Chief Special Warfare Operator Kelly Cooper, retired Navy SEAL, as the guest speaker.
Know Your Limits-Your Working Load Limits (WLL), That Is!
[Updated February 2023]
Be sure to check and understand your working load limits and rigging equipment before attempting a lift. Not only could your rigging fail, but you might also have exceeded the lifting capacity of your heavy rigging equipment
Photo Contest Winners 2022
From Supply to Support: E-Rigging.com Hosts First Annual The C4USE Gala for Navy SEALs and C4 Foundation
When the C4 Foundation needed rigging supplies for new decks they were building at their 560 acre ranch, they came to E-Rigging.com. Little did we know, this one transaction would spark a long-lasting relationship between our company and the Navy SEAL supporting non-profit.
E-Rigging's 2021 Photo Contest Winners
We couldn't wait to announce the first bi-annual E-Rigging photo contest. We had a tough decision to make but it came down to these three winners! See their entries and read their stories!
Inside the CNC
What a CNC Swiss does all day. We've condensed about 8 hours of stainless steel machining down to 1:17. About 800 Lag studs were cut during this time period. Enjoy!
